Course detail
Experimental Methods
FSI-HE1Acad. year: 2026/2027
This course covers the fundamental methods for measuring and evaluating the phenomena accompanying forming and machining processes. This encompasses mechanical testing, qualitative and quantitative wear assessment, and the measurement of forming forces, flow stress, strain rates, temperatures and heat, and vibration. These topics are considered in the context of specific forming and machining methods and tool working conditions (including the use of dynamometers, calorimeters, various sensors, and signal processing equipment).
The course also incorporates tribological testing of forming technologies, with an emphasis on the environmental sustainability of lubricants. This includes the assessment of friction, wear, and lubrication mechanisms under various forming conditions, the analysis of environmentally friendly lubricants, and their impact on energy consumption and tool longevity.
Furthermore, the course addresses the application of light (optical) and electron microscopy methods for evaluating the surface morphology of tools and workpieces.
Language of instruction
Czech
Number of ECTS credits
5
Assignment to study programme types
Master's
Mode of study
Not applicable.
Guarantor
Entry knowledge
Students are expected to have the knowledge of the theory and technology of machining and forming, fundamentals of metrology (with orientation to measuring of the geometry) and measuring of temperature and mechanical quantities (tensometry).
Rules for evaluation and completion of the course
Conditions for awarding of the course-unit credit: participation in exercises, fulfilling the assignments, and submitting written reports of required content and graphic forms. If these conditions are not satisfied, the tutor may define alternative conditions, in justified cases. In the examination, which is written and oral, the theoretical knowledge of lectured problems of machining and metal-forming is checked. It is classificated to the ECTS grading scale.When awarding the mark, the evaluation of the student by the tutor can be taken into account.
- Attendance in lectures is recommended. Attendance in exercises is compulsory. Attendance at lessons is required and checked by the tutor. One absence can be compensated by attending a seminar with another group, or by elaboration of substitute tasks. Longer absence is may be compensated for via special tasks by the agreement with the tutor.
The attendance to the seminar is regularly checked and the participation in the lesson is recorded.
- Attendance in lectures is recommended. Attendance in exercises is compulsory. Attendance at lessons is required and checked by the tutor. One absence can be compensated by attending a seminar with another group, or by elaboration of substitute tasks. Longer absence is may be compensated for via special tasks by the agreement with the tutor.
The attendance to the seminar is regularly checked and the participation in the lesson is recorded.
Aims
The goal of the subject is to acquaint the students with special experimental methods, which are necessary when evaluating the functional properties of cutting and forming tools, machinability and formability of materials, in the area of manufacture and research. The significance and application of technical measuring and testing in the development of the machining and metal-forming technologies are emphasized.
Students will be able to creatively participate in performing and evaluating of required experiments in the technological processes of machining and metal-forming. They will be able to recognize proper measuring methods and equipment with automated outputs and evaluation by the help of computer technique.
Students will be able to creatively participate in performing and evaluating of required experiments in the technological processes of machining and metal-forming. They will be able to recognize proper measuring methods and equipment with automated outputs and evaluation by the help of computer technique.
Study aids
Prerequisites and corequisites
Not applicable.
Basic literature
ASM handbook. Vol 8. Mechanical Testing. Materials Park, Ohio: ASM International, 1985. 892 p. ISBN 0-87170-708-X. (EN)
FOREJT, Milan a Miroslav PÍŠKA. Teorie obrábění, tváření a nástroje. Brno: Akademické nakladatelství CERM, 2006. ISBN 80-214-2374-9. ( dotisk 2008, 2012, 2015, 2018) (CS)
FOREJT, Milan, HUMÁR, Anton, PÍŠKA, Miroslav a Libor JANÍČEK. Experimentální metody. [online]. Studijní opory pro magisterský studijní program 23-01-T Strojní inženýrství, obor strojírenská technologie - obrábění - tváření, svařování - management, VUT v Brně, Fakulta strojního inženýrství, 2003 -doplněna 2019. Dostupné z: http://ust.fme.vutbr.cz/tváření/opory-save/Experimentální_metody_he1.pdf. (CS)
MEYERS, Marc A. Dynamic behavior of materials. New York: Wiley, c1994. ISBN 0-471-58262-x. (EN)
FOREJT, Milan a Miroslav PÍŠKA. Teorie obrábění, tváření a nástroje. Brno: Akademické nakladatelství CERM, 2006. ISBN 80-214-2374-9. ( dotisk 2008, 2012, 2015, 2018) (CS)
FOREJT, Milan, HUMÁR, Anton, PÍŠKA, Miroslav a Libor JANÍČEK. Experimentální metody. [online]. Studijní opory pro magisterský studijní program 23-01-T Strojní inženýrství, obor strojírenská technologie - obrábění - tváření, svařování - management, VUT v Brně, Fakulta strojního inženýrství, 2003 -doplněna 2019. Dostupné z: http://ust.fme.vutbr.cz/tváření/opory-save/Experimentální_metody_he1.pdf. (CS)
MEYERS, Marc A. Dynamic behavior of materials. New York: Wiley, c1994. ISBN 0-471-58262-x. (EN)
Recommended reading
FOREJT, Milan, HUMÁR, Anton, PÍŠKA, Miroslav a Libor JANÍČEK. Experimentální metody. [online]. Studijní opory pro magisterský studijní program 23-01-T Strojní inženýrství, obor strojírenská technologie - obrábění - tváření, svařování - management, VUT v Brně, Fakulta strojního inženýrství, 2003 -doplněna 2019. Dostupné z: http://ust.fme.vutbr.cz/tváření/opory-save/Experimentální_metody_he1.pdf. (CS)
MELOUN, M., MILITKÝ, J. Statistické zpracování experimentálních dat. PLUS s.r.o. Praha, 1994. 839 s. ISBN 80-85297-56-6. (CS)
MEYERS, Marc A. Dynamic behavior of materials. New York: John Wiley and Sons., c1994. 668 p. ISBN 0-471-58262-X. (EN)
SMITH, G.-T. Cutting Tool Technology - Industrial Handbook. Springer-Verlag London Limited. United Kingdom. 2008. 597 pp. ISBN 978-1-84800-204-3. (EN)
STAHL, J.-E. Metal Cutting Theories and Models. GB Seco Tools AB. 02858870 ST20126371. 2012. 580 pp. ISBN 978-91-673-1336-1. (EN)
MELOUN, M., MILITKÝ, J. Statistické zpracování experimentálních dat. PLUS s.r.o. Praha, 1994. 839 s. ISBN 80-85297-56-6. (CS)
MEYERS, Marc A. Dynamic behavior of materials. New York: John Wiley and Sons., c1994. 668 p. ISBN 0-471-58262-X. (EN)
SMITH, G.-T. Cutting Tool Technology - Industrial Handbook. Springer-Verlag London Limited. United Kingdom. 2008. 597 pp. ISBN 978-1-84800-204-3. (EN)
STAHL, J.-E. Metal Cutting Theories and Models. GB Seco Tools AB. 02858870 ST20126371. 2012. 580 pp. ISBN 978-91-673-1336-1. (EN)
Elearning
eLearning: currently opened course
Classification of course in study plans
Type of course unit
Lecture
26 hours, optionally
Teacher / Lecturer
Syllabus
- Vibrations (principles, experimental equipment, sensors, signal processing instruments)
- Cutting Forces and Resistance (dynamometers, data acquisition and evaluation, data processing)
- Tool Wear (criteria, measurement methods and equipment, processing of measured values), comprehensive evaluation of cutting tool properties
- Microscopic Methods (surface morphology analysis of tools and workpieces using Scanning Electron Microscopy – SEM)
- Heat and Temperature, Measurement of High-Speed Phenomena (measurement methods, sensors, processing of measured values)
- Demonstration of the practical application of experimental methods in industrial practice
- Experimental testing of bulk formability
- Tribological testing of forming technologies with an emphasis on the environmental sustainability of lubricants
- Experimental determination of material mechanical properties under dynamic loading conditions
- Demonstration of the practical application of experimental methods in industrial practice
- Measurement of forming forces, determination of stress states at higher strain rates
- Determination of flow stress at higher strain rates
- Experimental verification of dynamic phenomena using numerical simulation
Laboratory exercise
26 hours, compulsory
Teacher / Lecturer
Syllabus
- In-process measurement of tool wear and evaluation of results
- Processing of tool life-cutting speed relationships based on wear data
- Analysis of the cutting performance of drills
- Analysis of the cutting performance of milling cutters
- Torque measurement during thread cutting using a nut tap
- Analysis of energy and thermal phenomena in grinding
- Analysis of cutting fluid properties
- Comprehensive upsetting test and evaluation of flow stress, work of deformation, and strain rates
- Tribological testing of forming technologies with an emphasis on the environmental sustainability of lubricants
- Strain evaluation using the grid analysis method (macro-grids)
- Determination of impact forces and stress in the Taylor test
- Performing the Taylor test using a pneumatic gas gun and its evaluation
- Determination of dynamic mechanical properties of materials using the Hopkinson test method
Elearning
eLearning: currently opened course
This course was created by the project Akcelerace zelených dovedností a udržitelnosti na VUT v Brně with registration number NPO_VUT_MSMT-2143/2024-5.